SYNTAC 350

Sicurezza Durante la manipolazione di questo materiale, non e necessario prendere particolari pre- cauzioni di ventilazione, di igiene personale o anti-incendio. Tuttavia, la sabbiatura, la smeriglitura  ed altre lavorazioni a macchina producono notevoli quantitativi di polveri nocive che possono irritare gli occhi e le prime vie respiratorie. Durante le lavorazioni a macchina, indossare sempre mascherine filtranti e occhiali di sicurezza con schermi protettivi laterali. Assicurare una corretta ventilazione dei luoghi di lavoro (si consiglia un condotto flessibile che raggiunga direttamente il punto di contatto) Consultare il MSDS per informazioni più dettagliate sulla sicurezza e la protezione personale.
Lavorazione Velocità ed avanzamenti consigliati per tornire il Syntac 350:
GIRI/MIN   500-600/min  -  Dimensione di taglio  max 6 mm  -   Avanzamento 1,7 mm/s
UTENSILI: al carburo; mantenetre il tagliente affilato con un piccolo rompitruccioli.

Thermoforming

SYNTAC 350

Syntac 350 Syntactic composite tooling material for thermoforming.
Syntac 350 is a revolutionary syntactic composite material designed specifically for fabricating thermoforming plugs and other tooling.lt is inventoried in block and rod form for immediate shipment and can be easily machined into finished plugs with standard shop tools. Cured Syntac 350 material as supplied is a rigid, high strength composite of epoxy resin and hollow glass Microballoon microspheres. Typical properties are shown in the accompanying table. Syntac 350 plug material is engineered to eliminate problems inherent in aluminum. wood, felt or Delrin tooling Syntac plugs, because of their discrete air cells, have low thermal conductivity They do not draw heat from the sheet virtually eliminating the primary cause of plug sticking or fouling They require little warm up They are dimensionally stable and exceptionally durable. They are easily prepared, and replacement plugs are quickly made if needed A Patch Kit is available for repair of minor damage. Plugs of Syntac syntactic ca n be used in a wide variety of applications, including components for packaging, aerospace, automotive. appliances and luggage Syntac tooling is suitable for inline.sheet fed or rotary fed operations lt is also used for creating prototype tooling in other plastics processes.

Safety - No special ventilation. personal hygiene, or flammability precautions need to be observed in handling this material. However sanding, grinding and other machine operations will result in large volumes of nuisance dusts that may be irritating to the eyes and upper respiratory tract Nuisance particle masks, safety goggles with side shields, and 900d local ventilation (preferably flexible duct work extending to the point of contact) should always be used Consult the MSDS for more detailed information on safety and personal protection
Machining - Recommended speeds and feeds for turning Syntac 350 are as follows:
RPM's      500-600/min              Cut size    6 mm maximum                Feeds     1.7mm/s    Tooling    Carbide Maintain sharp edge with slight chip breaker